top of page
ODC-202
The ODC-202 monitored and displayed the differential pressure across the dust collectors clean and dirty sides. The product identified a pre-set high level limit and would start the timer/sequencer until the pre-set low level has been reached and then stop the sequence.
ODC-TC
The ODC-TC monitored and displayed the differential pressure across the dust collectors clean and dirty sides. The product identified a pre-set high level limit and would start the timer/sequencer until the pre-set low level has been reached and then stop the sequence. It also included a tube cleaner.
PT6
The PT6 is an AC solid state sequencer with up to 6 solenoid outputs. It was manufactured using through hole construction and hand soldering techniques.
PT10DC
The PT10DC is a DC solid state sequencer with up to 10 solenoid outputs. Up to 4 extender boards PT10DCEXT (10 outputs ea.) could be connected. It was manufactured using through hole construction and hand soldering techniques.
PT18
The PT6 is an AC solid state sequencer with up to 18 solenoid outputs. It was manufactured using through hole construction and hand soldering techniques.
PT20DC
The PT20DC is a DC solid state sequencer for up to 20 solenoid outputs. It was designed to provide an adjustable pulse to control the pulse valves on reverse jet dust collectors.
PT50DC
The PT50DC is a DC solid state sequencer designed for up to 50 solenoid valves. It was manufactured using through hole construction and hand soldering techniques.
ST10AC
The ST10AC is an AC solid state sequencer designed to provide an adjustable pulse to operate up to 10 pilot valves in reverse jet pulse dust collectors. It was manufactured using surface mount techniques.
ST10DC
The ST10DC is a DC solid state sequencer designed to provide an adjustable pulse to control the pulse valves on reverse jet dust collectors. Up to 10 solenoids could be connected. Manufactured using surface mounting.
STM11-6DC
The STM11-6DC is a solid state sequencer designed to provide an adjustable duration pulse to output drivers in a continuous cycle. Connect up to 6 solenoids.
STR4
The STR4 is an AC solid state sequencer designed to provide an adjustable duration pulse to output drivers in a continuous cycle for up to 4 solenoid valves.
STR9DC
The STR9DC is a DC solid state sequencer designed to pulse up to 9 solenoids. It was manufactured using surface mounting techniques.
TC900
The Tube Cleaner 900 has been designed to clean the high pressure and low pressure air tubes connecting the Pressure gauge to the collector. Was available in AC or DC versions.
TM11-6DC
The TM11-6DC is a DC solid state sequencer designed to provide an adjustable duration pulse to 6 output drivers in a continuous cycle. Made using through hole techniques.
TM11-10DC
The TM11-10DC is a DC solid state sequencer designed to provide an adjustable duration pulse to 10 output drivers in a continuous cycle. Made using through hole techniques.
TM11-RCA6
The TM11-RCA6 is a solid state sequencer designed to provide an adjustable duration pulse to output drivers in a continuous cycle for up to 4 valves. It is designed to fit inside a Goyen RVA6V54 solenoid box.
TM11-TR2
The TM11-TR2 is a solid state sequencer designed to provide an adjustable duration pulse to 2 output drivers in a continuous cycle
TM11-TR4
The TM11-TR4 is a solid state sequencer designed to provide an adjustable duration pulse to 4 output drivers in a continuous cycle
bottom of page