Ptronik Pty Limited
ABN: 31 003 718 161
17 Windsor Street
RICHMOND NSW 2753
AUSTRALIA
TEL: +61 2 4578 9611
FAX: +61 2 4578 9622
Email us

The TM11-10DC is a solid state sequencer designed to provide an adjustable duration pulse to output drivers in a continuous cycle. The time interval between pulse outputs is set by the STEP potentiometer, the pulse duration is set by the PULSE potentiometer. Power ON and each output pulse time is indicated by LED's. Two terminals labelled D.P.SW. are provided for ON DEMAND cleaning. After pressure switch contact closure, the timer will stop the sequence. When the contact opens the sequence continues from the previous position. Number of outputs is programmed by the SELECT STEPS switch.

SPECIFICATIONS:

• Input Voltage : 12 to 24VDC
• No.of Outputs : 1 to 10 (selectable on card)
• Step Time : 1 - 90 sec.
• Pulse Time : 0.02 - 1 sec.
• Output Load : 1 Amp.
• Operating Temp. : -10 to +55 degrees centigrade
  

DIMENSIONS AND MOUNTING DETAILS:

The TM11-10DC consists of a PC Card 150mm x 150mm x 30mm with screw terminals for field wiring. A suitable dustproof plastic enclosure with clear lid is available.

WIRING:

Archive Status:

This product was archived in January 2008. Replaced by STM11-6DC.

Back to Top