Ptronik Pty Limited
ABN: 31 003 718 161
17 Windsor Street
RICHMOND NSW 2753
AUSTRALIA
TEL: +61 2 4578 9611
FAX: +61 2 4578 9622
Email us

The ST10EXT is a solid state sequencer extender board, designed to provide an adjustable pulse to control the pulse valves on reverse jet dust collectors. The number of outputs, on time, off time and clean up cycle are programmed by the program buttons and displayed on the program display of the master card ST10. Up to 4 extender boards ST10EXT (10 outputs ea.) can be connected to the connector CON3. One 200 mm ribbon cable is provided with every card. The number of outputs are selected by SW1.

SPECIFICATIONS:

• Input: AC supply and ribbon cable from ST10
• Fuse: controlled by ST10 card
• No. of Outputs: 10
• Off Time: controlled by ST10 card
• On Time: controlled by ST10 card
• Clean up cycle: controlled by ST10 card
• Output voltag:e 110-240AC
• Load output: 2 Amp
• Operating temp: -10 to + 55 degree centigrade

Different voltage combinations are available upon request.

• Input voltage from 110VAC to 415VAC
• Output voltage from 24VAC to 415VAC

DIMENSIONS:

The ST10EXT card consists of a P.C.card 150 mm long x150mm wide and 30mm high. A suitable dustproof plastic or metal enclosure is available.

WIRING:

Back to Top