Ptronik Pty Limited
ABN: 31 003 718 161
17 Windsor Street
RICHMOND NSW 2753
AUSTRALIA
TEL: +61 2 4578 9611
FAX: +61 2 4578 9622
Email us

The ST10DCEXT is a solid state sequencer extender board, designed to provide an adjustable pulse to control the pulse valves on reverse jet dust collectors. The number of outputs, on time, off time and clean up cycle are programmed by the program buttons and displayed on the program display of the master card ST10DC. Up to 4 extender boards ST10DCEXT (10 outputs ea.) can be connected to the connector CON3. One 200 mm ribbon cable is provided with every card. The number of outputs are selected by SW1.

Above: ST10DC-ext extension board fitted onto ST10DC board

SPECIFICATIONS:

• Input: ribbon cable from ST10DC
• Fuse: controlled by ST10DC card
• No. of Outputs: 10
• Off Time: controlled by ST10DC card
• On Time: controlled by ST10DC card
• Clean up cycle: controlled by ST10DC card
• Output voltage: 24VDC
• Load output: 2 Amp
• Operating temp:. -10 to + 55 degree centigrade

Different voltage combinations are available upon request.

• Input voltage from 110VAC to 415VAC and 24VDC to 48VDC
• Output voltage from 24VDC to 48VDC

DIMENSIONS:

The ST10DCEXT card consists of a P.C.card 115 mm long x 60mm wide and 15mm high. A suitable dustproof plastic or metal enclosure is available.

WIRING:

Back to Top