Ptronik Pty Limited
ABN: 31 003 718 161
17 Windsor Street
RICHMOND NSW 2753
AUSTRALIA
TEL: +61 2 4578 9611
FAX: +61 2 4578 9622
Email us

The ST10DC sequencer is designed to operate the pilot valves in reverse jet pulse dust collectors. It directly replaces the well known reliable PT10DC timer. There are new features added to control the dust collector. This low cost controller is easily programmed and all input and output functions are indicated by LED's.

SPECIFICATIONS:

Features:

• Code protection
• 10 OUTPUTS (up to 50 outputs with EXT.board) see ST10DC-ext
• Incremental or Arbitrary sequence to energise pilot valves
• ON TIME: 10 ms to 990 ms
• OFF TIME: 1sec to 999 sec
• OFF TIME 2: 1sec to 999 sec
• CLEAN UP: up to 255 cycles

Inputs:

• AUX. input
• FAST CYCLE for faster cleaning
• D.P. SWITCH (Diff. Pressure) INTERRUPT
• D.P. SWITCH (Diff. Pressure) FULL CYCLE
• INPUT VOLTAGE: 110 to 240VAC (other voltages are available)

Outputs:

• Plug in Output terminals to pilot SOLENOID valves
• RELAY ALARM (output) to indicate operational function of controller or running feedback
• OUTPUT VOLTAGE: 24VDC (other voltages are available)

All input and output connections are made by plug-in terminals to save time and avoid wrong wiring at the maintenance level. ENCLOSURE is available on request.

DIMENSIONS:

The ST10DC consists of a P.C. card 250mm long x 150mm wide and 70mm high with screw terminals for field wiring. A suitable dustproof plastic enclosure with clear lid or DIP enclosure is available.

WIRING:

Back to Top