Ptronik Pty Limited
ABN: 31 003 718 161
17 Windsor Street
RICHMOND NSW 2753
AUSTRALIA
TEL: +61 2 4578 9611
FAX: +61 2 4578 9622
Email us

The PT10EXT is a solid state sequencer extender board, designed to provide an adjustable pulse to control the pulse valves on reverse jet dust collectors. The number of outputs, on time, off time and clean up cycle are programmed by the program buttons and displayed on the program display of the master card PT10. Up to 3 extender boards PT10EXT (10 outputs ea.) can be connected to the connector CON3. One 200 mm ribbon cable is provided with every card. The number of outputs are selected by SW1.

SPECIFICATIONS:

• Input: AC supply and ribbon cable from PT10
• Fuse: controlled by PT10 card
• No. of Outputs: 10
• Off Time: controlled by PT10 card
• On Time: controlled by PT10 card
• Clean up cycle: controlled by PT10 card
• Output voltag:e 110-240AC
• Load output: 2 Amp
• Operating temp: -10 to + 55 degree centigrade

Other voltages and program changes are available to order.

DIMENSIONS:

The PT10EXT card consists of a P.C.card 150 mm long x150mm wide and 30mm high. A suitable dustproof plastic or metal enclosure is available.

WIRING:

Archive Status:

This product was archived in June 2006. The ST10 series replaced this product.

Back to Top